Comment appliquer la peinture au pistolet à peinture ?

How to apply paint with a spray gun?

Very often, our customers ask us if it is possible to spray paint: although it depends on the nature of the paint, the answer is yes when it comes to Algo paints!

Spray application has a major advantage: it saves a lot of time during application, which is why this question often arises before applying the paint.

This article will guide you through the steps required to spray paint your room: from choosing the spray gun to preparing for painting.

Which airless spray gun should I choose for walls and ceilings?

An airless spray gun is an electric paint gun that allows you to spray paint at very high pressure without adding air. This process is achieved using a nozzle, which is chosen according to the desired spray angle and flow rate.

This type of gun is very practical for painting work because it allows you to obtain a quality result.

Choosing a spray gun is not easy, but here are the answers to the questions you may have to choose the best paint gun for your painting project:

Wagner or Graco, which brand to choose?

These two brands are the best known to individuals and professionals because they are also the most popular guns.

Graco is a brand primarily recognized by professionals: guaranteeing optimal application, the price of a Graco gun is quite expensive.

The Wagner brand is better known to the general public, as the Airless guns of this German brand are sold in large DIY stores.

Low pressure, high pressure: how much power for a paint gun?

The choice of pressure depends mainly on the need you have for the gun. If it's for a one-off project, then a low-pressure gun will be sufficient for your work.

However, a high-pressure gun will guarantee you a more precise result for your painting project. This type of gun is equipped with a compressor, which allows for greater power.

How to spray paint your house like a pro?

Once you've chosen your paint gun, you're ready to apply the paint: so find out how to use a paint gun and how to clean it.

How to use a paint gun?

First, make sure the gun is in good working order and, above all, clean before setting the air pressure to the manufacturer's recommended level.

It is strongly recommended to dilute the paint with water, up to 10% with clear water in order to obtain a more fluid paint when applying and make sure not to form air bubbles with the paint.

Regarding nozzle choice: we recommend using a standard nozzle, usually 515 or 517.

These nozzles are best suited for applying Algo paint.

Now you're ready to apply the paint! First, don't hesitate to test a small area of the surface to confirm that the settings are correct.

To apply: Hold the spray gun between 15 and 30 centimeters from the surface to be painted while making regular movements. For even coverage, it is recommended to make parallel passes.

Paint application should also be controlled to limit over-application and potential drips.

How to clean your paint gun?

It is important to clean your equipment thoroughly before potential reuse in the future.

This is not a complicated step, but it must be carried out with care if you want to be able to successfully complete another painting project.

To clean the tank, press the gun's discharge button to release any paint that may be in the line. Fill the tank with water and discharge the gun until the water runs clear.

The nozzle and needles also need to be cleaned.

Back to blog